So Cal lakes that allow bow fishing

El Capitan
Sutherland
Otay
San Vicente
Hodges

Lakes Already Approved:

Elsinore
Big Bear
Cachuma
Hemet (with strict regulations)

uml and console job control

I started uml with my host debian file system:


./linux rootfstype=hostfs rw init=/home/tzhang/uml/init-uml.sh mem=64M TERM=linux eth0=tuntap,,,192.168.6.88

However the shell I get does not have job control. I tried multiple things found on internet but none did the trick for me. This is what finally solved the problem:

1. get busybox and build it with the "cttyhack" enabled (in shell section of menuconfig)
2. ln -sf busybox cttyhack
3. run that in your init. My init.sh looks like this:


#!/bin/bash
export PS1="[\\u@\\h:\\w] $"
export HOME=/home/tzhang
. /home/tzhang/.bashrc
ifconfig eth0 192.168.6.99
hostname -b R1
export PATH=/usr/local/bin:/usr/bin:/bin:/sbin:/usr/local/sbin:/usr/sbin
mount -t proc proc /proc
mount -t sysfs sysfs /sys
mount -t tmpfs tmpfs /var/run -o rw,nosuid,nodev
mount -t tmpfs tmpfs /var/log -o rw,nosuid,nodev
cd $HOME/uml

mount -t tmpfs /dev/ /dev/

/etc/init.d/udev start
/home/tzhang/uml/dropbear -r dropbear_rsa_host_key
exec setsid /home/tzhang/uml/cttyhack bash

This solved the problem beautifully. The last line is what did the trick for job control.
the udev daemon and dropbear made ssh possible.

=============UPDATED 4/10/2017=====================
init.sh:
#!/bin/bash
export PS1="\u@\h:\w $"
export HOME=/home/tzhang
. /home/tzhang/.bashrc
ifconfig eth0 192.168.6.99
hostname -b R1
export PATH=/usr/local/bin:/usr/bin:/bin:/sbin:/usr/local/sbin:/usr/sbin
mount -t proc proc /proc
mount -t sysfs sysfs /sys
mount -t tmpfs tmpfs /var/run -o rw,nosuid,nodev
mount -t tmpfs tmpfs /var/log -o rw,nosuid,nodev
cd $HOME/uml
mount -t tmpfs /dev/ /dev/
ifconfig eth1 192.168.3.2
ifconfig eth0 192.168.2.2
busybox mdev -s
mkdir /dev/pts
mount -t devpts /dev/pts /dev/pts
#dropbear -r dropbear_rsa_host_key -p 2222
exec setsid /home/tzhang/uml/cttyhack bash

run.sh

./linux rootfstype=hostfs rw init=/home/tzhang/uml/init.sh mem=64M TERM=linux \
eth0=tuntap,tap0,,192.168.2.88 \
eth1=tuntap,tap1,,192.168.3.88

Host /etc/network/interfaces

# The primary network interface
auto ens33
iface ens33 inet manual

auto ens38
iface ens38 inet manual

auto tap0
iface tap0 inet manual
    pre-up ip tuntap add tap0 mode tap user tzhang
    up ip link set dev tap0 up

auto tap1
iface tap1 inet manual
    pre-up ip tuntap add tap1 mode tap user tzhang
    up ip link set dev tap1 up

auto br0
iface br0 inet dhcp
        bridge_ports ens33 tap0

auto br0:1
allow-hotplug br0:1
iface br0:1 inet static
        address 192.168.2.1
        broadcast 192.168.2.255
        netmask 255.255.255.0

auto br1
iface br1 inet dhcp
        bridge_ports ens38 tap1

auto br1:1
allow-hotplug br1:1
iface br1:1 inet static
        address 192.168.3.1
        broadcast 192.168.3.255
        netmask 255.255.255.0

uml with minimal debian

Build kernel:

1. get kernel

2. make ARCH=um defconfig

3. make ARCH=um menuconfig ; to remove options you don't need

4. make -j 12 ; parallel build

Build rootfs:

dd if=/dev/zero of=my.rootfs bs=1M seek=512 count=0
mkfs.ext2 -F my.rootfs

mkdir rootfs
sudo mount -o loop my.rootfs rootfs
sudo debootstrap --arch=i386 --variant=minbase lucid rootfs

SQL Server 2008 can't login with newly created user

SQL Server was not configured to allow mixed authentication.
Here are steps to fix:

1. Right-click on SQL Server instance at root of Object Explorer, click on Properties
2. Select Security from the left pane.
3. Select the SQL Server and Windows Authentication mode radio button, and click OK.
   
   Right-click on the SQL Server instance, select Restart (alternatively, open up Services and restart the SQL Server service).
   
   I wish Microsoft has better document.
   
   Source: http://stackoverflow.com/questions/1719399/sql-server-2008-cant-login-with-newly-created-user